Your TANlocks in comparison

TANlock 3 Logo
TANlock-3-RFID-Netzwerkkabel

The TANlock 3 is connected to a RJ45 plug (LAN cable). This cable is used for both the web-based communication and the power supply via PoE. Thanks to the modular design (TAM), the authentication method can also be subsequently adapted to more stringent security requirements in the company. Your IT rack is thus monitored securely and reliably.

TANlock Zero Logo
TANlock Zero Kabel

The TANlock Zero is connected to two 6-pin connectors. The power supply, various signal inputs and outputs, and Wiegand data line (optional) are connected to this connector. With the help of this simple TANlock circuit and the use of the numerous modules for authentication (TAM), the TANlock Zero fulfills the wish for simple integration, communication and control. The parameters “Handle folded out”, “Turn handle twisted” and optionally “Door(s) open” are monitored.

Module options

  • Remote
  • PIN + RFID
  • RFID
  • Touch Display
  • Fingerprintscan + RFID
  • Hand vain scan
  • Two factor authentication

TANlock 3

TANlock Zero

Protocols

  • HTTPs
  • Syslog
  • MS Active Directory
  • LDPAs
  • RESTful API
  • Web API
  • SNMP
  • OSS
  • Websockets
  • VLAN
  • DHCP
  • Wiegand

TANlock 3

TANlock Zero

Power Supply

  • RJ45 Plug (Power-over-Ethernet)
  • External power supply 5V-24V
  • Emergency power supply via USB-C

TANlock 3

TANlock Zero

RFID Technologies

  • Legic Advant
  • Legic Prime
  • Mifare Classic
  • Mifare Desire EV1
  • Mifare Desire EV2
  • HID iClass

TANlock 3

TANlock Zero

IP protection class

  • IP54
  • IP65

TANlock 3

TANlock Zero

Other

  • Exchangeable modules
  • Mechanical Override with DIN half cylinder
  • Adapters for different types of cabinets
  • Ingoing door contacts
  • Outgoing relays

TANlock 3

  • 2
  • 2

TANlock Zero

  • 2
  • 2

CAN bus sensors

  • Humidity
  • Temperature
  • Smoke detection
  • Vibration sensor

TANlock 3

TANlock Zero

Mounting

Either two 25 mm x 50 mm cutouts or one 25 mm x 150 mm cutout are required. These standard cutouts are present in almost every control cabinet.
In case you use Rittal or Vertiv control cabinets, we also offer suitable adapters, which are sometimes required on these types of cabinets.